Property: ShortDesc
From SpecNext official Wiki
This is a property of type Text.
- Description
- Short text description. (en)
S
Enables/disables [[Sprites]] and [[Video_Modes#LoRes_Layer.2FRadasjimian_Mode|Lores Layer]], and chooses priority of sprites and [[Layer 2]]. +
I
Enabling internal ports decoding +
Enabling internal ports decoding +
Enabling internal ports decoding +
Enabling internal ports decoding +
E
Expansion bus controls +
Expansion bus enable/config +
P
GPIO pins mapped to Next Register +
I
Has UART interrupt happened? +
K
High data to PS/2 Keymap (MSB of data in bit 0) +
C
Holds high byte of [[Copper]] control flags. +
Holds low byte of [[Copper]] control bits. +
A
Holds the MSB (only, as bit 0) of the raster line currently being drawn. +
V
Holds the eight LSBs of the line on which a raster interrupt should occur. +
A
Holds the eight LSBs of the raster line currently being drawn. +
M
Identifies [[TBBlue]] board type. Should always be 10 (binary 0000 1010) on Next. +
C
Identifies core (FPGA image) version (sub minor number). +
Identifies core (FPGA image) version. +
M
Identifies timing and machine type. +
N
Identifies type of last reset. Can be written to force reset. +