DMA interrupt enable 2
From SpecNext Wiki
| Next Register Number | $CE |
|---|---|
| Readable | Yes |
| Writable | Yes |
| Short Description | UART Interrupts that can override DMA |
bit 7 = Reserved must be zero bit 6 = UART1 Tx empty bit 5 = UART1 Rx half full \ shared bit 4 = UART1 Rx available / interrupt bit 3 = Reserved must be zero bit 2 = UART0 Tx empty bit 1 = UART0 Rx half full \ shared bit 0 = UART0 Rx available / interrupt
- Set bits indicate the corresponding interrupt will interrupt a dma operation when in hw im2 mode
soft reset = 0x00