Difference between revisions of "Keymap High Address Register"

From SpecNext official Wiki
Jump to: navigation, search
(updated to 78a6ee50)
 
(7 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
{{NextRegister
 
{{NextRegister
|Number=$40
+
|Number=$28
|Readable=No
+
|Readable=Yes
|Writable=No
+
|Writable=Yes
 +
|ShortDesc=PS/2 Keymap address MSB, read (pending) first byte of palette colour
 
}}
 
}}
 +
Write:
 +
  bit 7 = 0 to select ps2 keymap, 1 to select key joystick
 +
  bits 6:1 = Reserved, must be 0
 +
  bit 0 = MSB keymap address
 +
 +
Read:
 +
 +
  bits 7:0 = Stored first-byte palette value from {{NextRegNo|$44}}
 +
 +
This value does update right after writing first 8 bits of colour to NextReg $44, while the real palette entry is modified only after the second write (adding ninth bit and L2 priority bit) is done. So half-written value can't be read back through {{NextRegNo|$41}}, but can be read with this register (after writing second byte to $44, this register still reads the first byte value, but the change is also committed to the palette itself and visible by reading $41 + $44 registers).

Latest revision as of 11:35, 3 November 2024

Number $28
Readable Yes
Writable Yes
Short Description PS/2 Keymap address MSB, read (pending) first byte of palette colour

Write:

 bit 7 = 0 to select ps2 keymap, 1 to select key joystick
 bits 6:1 = Reserved, must be 0
 bit 0 = MSB keymap address

Read:

 bits 7:0 = Stored first-byte palette value from Enhanced ULA Palette Extension ($44)

This value does update right after writing first 8 bits of colour to NextReg $44, while the real palette entry is modified only after the second write (adding ninth bit and L2 priority bit) is done. So half-written value can't be read back through Palette Value Register ($41), but can be read with this register (after writing second byte to $44, this register still reads the first byte value, but the change is also committed to the palette itself and visible by reading $41 + $44 registers).