UART Frame

From SpecNext official Wiki
Revision as of 22:03, 1 July 2022 by Em00k (talk | contribs) (Created page with "{{Port |Number=$163B |NumberDec=5691 |PortMask=%0001 0110 0011 1011 |ShortDesc=UART Frame |Readable=Yes |Writable=Yes |Subsystem=UART }} 0x163B UART Frame (R/W) (hard reset =...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Number $163B
Decimal 5691
Short desc. UART Frame
Bit Mask %0001 0110 0011 1011
Readable Yes
Writable Yes
Subsystem UART

0x163B UART Frame (R/W) (hard reset = 0x18) bit 7 = 1 to immediately reset the Tx and Rx modules to idle and empty fifos bit 6 = 1 to assert break on Tx (Tx = 0) when Tx reaches idle bit 5 = 1 to enable hardware flow control * bits 4:3 = number of bits in a frame

 11 = 8 bits
 10 = 7 bits
 01 = 6 bits
 00 = 5 bits

bit 2 = 1 to enable parity check bit 1 = 0 for even parity, 1 for odd parity bit 0 = 0 for one stop bit, 1 for two stop bits

  • The esp ignores hardware flow control
  • In joystick i/o mode only cts is available