Difference between revisions of "Tilemap Control Register"
(Core 2.00.26 changes) |
(Core 2.00.27 changes.) |
||
| Line 16: | Line 16: | ||
| 4 || palette select (0 = first Tilemap palette, 1 = second) | | 4 || palette select (0 = first Tilemap palette, 1 = second) | ||
|- | |- | ||
| − | | 3- | + | | 3-2 || Reserved, must be 0 |
| + | |- | ||
| + | | 1 || 1 to activate 512 tile mode (bit 0 of tile attribute is ninth bit of tile-id)<br /> | ||
| + | 0 to use bit 0 of tile attribute as "ULA over tilemap" per-tile-selector | ||
| + | |- | ||
| + | | 0 || 1 to enforce "tilemap over ULA" layer priority | ||
|} | |} | ||
| Line 26: | Line 31: | ||
Bit 4 selects one of two tilemap palettes used for final colour lookup. | Bit 4 selects one of two tilemap palettes used for final colour lookup. | ||
| + | |||
| + | Bit 1 enables the 512-tile-mode when the tile attribute (either global in $6C or per tile in map data) contains ninth bit of tile-id value. In this mode the tiles are drawn under ULA pixels, unless bit 0 is used to force whole tilemap over ULA. | ||
| + | |||
| + | Bit 0 can enforce tilemap over ULA either in 512-tile-mode, or even override the per-tile bit selector from tile attributes. If zero, the tilemap priority is either decided by attribute bit or in 512-tile-mode it is under ULA. | ||
Revision as of 23:38, 13 February 2019
| Number | $6B |
|---|---|
| Readable | Yes |
| Writable | Yes |
| Short Description | Controls Tilemap mode. |
| Bit | Function |
|---|---|
| 7 | 1 to enable the tilemap |
| 6 | 0 for 40x32, 1 for 80x32 |
| 5 | 1 to eliminate the attribute entry in the tilemap |
| 4 | palette select (0 = first Tilemap palette, 1 = second) |
| 3-2 | Reserved, must be 0 |
| 1 | 1 to activate 512 tile mode (bit 0 of tile attribute is ninth bit of tile-id) 0 to use bit 0 of tile attribute as "ULA over tilemap" per-tile-selector |
| 0 | 1 to enforce "tilemap over ULA" layer priority |
Bits 7 & 6 enable the tilemap and select resolution.
Bit 5 changes the structure of the tilemap so that it contains only 8-bit tilemap-id entries instead of 16-bit tilemap-id and tile-attribute entries.
If 8-bit tilemap is selected, the tilemap contains only tile numbers and the attributes are taken from Default Tilemap Attribute Register ($6C).
Bit 4 selects one of two tilemap palettes used for final colour lookup.
Bit 1 enables the 512-tile-mode when the tile attribute (either global in $6C or per tile in map data) contains ninth bit of tile-id value. In this mode the tiles are drawn under ULA pixels, unless bit 0 is used to force whole tilemap over ULA.
Bit 0 can enforce tilemap over ULA either in 512-tile-mode, or even override the per-tile bit selector from tile attributes. If zero, the tilemap priority is either decided by attribute bit or in 512-tile-mode it is under ULA.