Difference between revisions of "Tilemap Control Register"

From SpecNext official Wiki
Jump to: navigation, search
(Core 2.00.26 changes)
 
(more explicit description of palette offset)
 
(5 intermediate revisions by 3 users not shown)
Line 3: Line 3:
 
|Readable=Yes
 
|Readable=Yes
 
|Writable=Yes
 
|Writable=Yes
|ShortDesc=Controls Tilemap mode.
+
|ShortDesc=Controls [[Tilemap]] mode.
 
}}
 
}}
 
{| class="wikitable"
 
{| class="wikitable"
Line 16: Line 16:
 
| 4 || palette select (0 = first Tilemap palette, 1 = second)
 
| 4 || palette select (0 = first Tilemap palette, 1 = second)
 
|-
 
|-
| 3-0 || Reserved, must be 0
+
| 3 || enable "text mode"
 +
|-
 +
| 2 || Reserved, must be 0
 +
|-
 +
| 1 || 1 to activate 512 tile mode (bit 0 of tile attribute is ninth bit of tile-id)<br />
 +
0 to use bit 0 of tile attribute as "ULA over tilemap" per-tile-selector
 +
|-
 +
| 0 || 1 to enforce "tilemap over ULA" layer priority
 
|}
 
|}
  
 
Bits 7 & 6 enable the tilemap and select resolution.
 
Bits 7 & 6 enable the tilemap and select resolution.
  
Bit 5 changes the structure of the tilemap so that it contains only 8-bit tilemap-id entries instead of 16-bit tilemap-id and tile-attribute entries.
+
Bit 5 changes the structure of the tilemap so that it contains only 8-bit tilemap-id entries instead of 16-bit tilemap-id plus tile-attribute entries.
  
 
If 8-bit tilemap is selected, the tilemap contains only tile numbers and the attributes are taken from {{NextRegNo|$6C}}.
 
If 8-bit tilemap is selected, the tilemap contains only tile numbers and the attributes are taken from {{NextRegNo|$6C}}.
  
 
Bit 4 selects one of two tilemap palettes used for final colour lookup.
 
Bit 4 selects one of two tilemap palettes used for final colour lookup.
 +
 +
Bit 3 enables "text mode" where the tile-graphic is defined as 1-bit B&W bitmap (same as UDG = User Defined Graphic characters on original ZX Spectrum) => one tile needs only 8 bytes to define graphics. The tile-map data are also interpreted differently, the associated flag byte is 7:1 split, the bottom bit 0 being still "ULA over Tilemap" or "ninth bit of tile number", but the top 7 bits are extended palette offset (copied as top 7 bits of palette index, the eight bottom bit is the pixel value). The transparency is then checked against the {{NextRegNo|$14}} colour (after the colour lookup in the palette), not against the four bit Tilemap transparency colour-index.
 +
 +
Bit 1 enables the 512-tile-mode when the tile attribute (either global in {{NextRegNo|$6C}} or per tile in map data) contains ninth bit of tile-id value. In this mode the tiles are drawn under ULA pixels, unless bit 0 is used to force whole Tilemap over ULA.
 +
 +
Bit 0 can enforce Tilemap over ULA either in 512-tile-mode, or even override the per-tile bit selector from tile attributes. If zero, the Tilemap priority is either decided by attribute bit or in 512-tile-mode it is under ULA.

Latest revision as of 11:11, 13 May 2020

Number $6B
Readable Yes
Writable Yes
Short Description Controls Tilemap mode.
Bit Function
7 1 to enable the tilemap
6 0 for 40x32, 1 for 80x32
5 1 to eliminate the attribute entry in the tilemap
4 palette select (0 = first Tilemap palette, 1 = second)
3 enable "text mode"
2 Reserved, must be 0
1 1 to activate 512 tile mode (bit 0 of tile attribute is ninth bit of tile-id)

0 to use bit 0 of tile attribute as "ULA over tilemap" per-tile-selector

0 1 to enforce "tilemap over ULA" layer priority

Bits 7 & 6 enable the tilemap and select resolution.

Bit 5 changes the structure of the tilemap so that it contains only 8-bit tilemap-id entries instead of 16-bit tilemap-id plus tile-attribute entries.

If 8-bit tilemap is selected, the tilemap contains only tile numbers and the attributes are taken from Default Tilemap Attribute Register ($6C).

Bit 4 selects one of two tilemap palettes used for final colour lookup.

Bit 3 enables "text mode" where the tile-graphic is defined as 1-bit B&W bitmap (same as UDG = User Defined Graphic characters on original ZX Spectrum) => one tile needs only 8 bytes to define graphics. The tile-map data are also interpreted differently, the associated flag byte is 7:1 split, the bottom bit 0 being still "ULA over Tilemap" or "ninth bit of tile number", but the top 7 bits are extended palette offset (copied as top 7 bits of palette index, the eight bottom bit is the pixel value). The transparency is then checked against the Global Transparency Register ($14) colour (after the colour lookup in the palette), not against the four bit Tilemap transparency colour-index.

Bit 1 enables the 512-tile-mode when the tile attribute (either global in Default Tilemap Attribute Register ($6C) or per tile in map data) contains ninth bit of tile-id value. In this mode the tiles are drawn under ULA pixels, unless bit 0 is used to force whole Tilemap over ULA.

Bit 0 can enforce Tilemap over ULA either in 512-tile-mode, or even override the per-tile bit selector from tile attributes. If zero, the Tilemap priority is either decided by attribute bit or in 512-tile-mode it is under ULA.