Sprite port-mirror Attribute 3 Register
From SpecNext official Wiki
Revision as of 11:05, 24 December 2018 by wiki>Ped7g (Core 2.00.22 changes, and forum knowledge from Jim Bagley distilled.)
| Number | $38 |
|---|---|
| Readable | No |
| Writable | Yes |
| Short Description | Nextreg port-mirror to write directly into "byte 4" of Sprite Attribute Upload ($xx57 / 87). |
Byte 4 is bitmapped:
| Bit | Description |
|---|---|
| 7 | Enable visibility |
| 6 | ? see note below. |
| 5-0 | Pattern index ("Name") |
Bit 6 is in normal port writing used to indicate there will be "byte 5" following, while with NextReg mirror the "byte 5" is directly accessible at Sprite port-mirror Attribute 4 Register ($39). At the time of adding this documentation, it is not clear what bit 6 does here, but value "0" may work as "reset whole byte 5 to zero", so if you intend to use extended "byte 5" features, write "1" or test with actual HW. And other way too, if you don't plan to use the extra features, probably write zero to Sprite port-mirror Attribute 4 Register ($39) explicitly, even if you use "0" for bit 6 here.