Difference between revisions of "Sprite port-mirror Attribute 2 (with INC) Register"
From SpecNext official Wiki
(core 2.00.23 changes) |
(Core 2.00.26 changes) |
||
| Line 20: | Line 20: | ||
|} | |} | ||
| − | After write into sprite-attribute "byte 3" ({{PortNo|$xx57}}), the {{NextRegNo|$34}} is incremented (with all consequences stemming from such action). If the sprite | + | After write into sprite-attribute "byte 3" ({{PortNo|$xx57}}), the {{NextRegNo|$34}} is incremented (with all consequences stemming from such action). If the sprite 127 was modified, the result of the increment is officially "undefined behaviour", and code should explicitly set valid 0..127 sprite index before next sprite-attribute manipulation. |
Revision as of 10:10, 27 January 2019
| Number | $77 |
|---|---|
| Readable | No |
| Writable | Yes |
| Short Description | Same as Sprite port-mirror Attribute 2 Register ($37) (write third byte of sprite-attributes), plus increments Sprite port-mirror Index Register ($34) |
Byte 3 is bitmapped:
| Bit | Description |
|---|---|
| 4-7 | Palette offset, added to each palette index from pattern before drawing |
| 3 | Enable X mirror |
| 2 | Enable Y mirror |
| 1 | Enable rotation |
| 0 | MSB of X coordinate |
After write into sprite-attribute "byte 3" (Sprite Attribute Upload ($xx57 / 87)), the Sprite port-mirror Index Register ($34) is incremented (with all consequences stemming from such action). If the sprite 127 was modified, the result of the increment is officially "undefined behaviour", and code should explicitly set valid 0..127 sprite index before next sprite-attribute manipulation.