Difference between revisions of "RPi0 Acceleration"

From SpecNext official Wiki
Jump to: navigation, search
(Changed redirect target from Pi:index to Pi:Main Page)
(Tag: Redirect target changed)
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The Spectrum Next has a 40 pin male header to which a Raspberry Pi Zero (RPi0) can be connected and is labelled  [[Circuit_Diagrams#Accelerator_port|Accelerator Board]] on the main board.
+
#REDIRECT [[Pi:Main_Page]]
 
 
The RPi0 has a Broadcom BCM2835 SoC with an ARMv6 core, a Videocore 4 GPU, and its own 512 MB memory and HDMI output. It has its own SD card from which it boots. While it can traditionally run Linux, it can also be programmed "bare metal" directly in assembly language.
 
 
 
It is not yet known how the RPi0 will interface with the Spectrum Next. It was originally used to provide HDMI digital video and audio output for the Spectrum Next, but the HDMI functionality was moved onto the main board, making this original function redundant.
 
 
 
It is known that the Raspberry Pi versions supporting Wi-fi will not provide that Wi-fi to the Next.
 
 
 
== Attaching a Raspberry Pi Zero ==
 
 
 
To connect the RPi0 to the Spectrum Next, a 20x2 pin female header needs to be attached on the underside of the Pi:
 
 
 
<gallery>
 
Rpizerotop.jpg|RPi0 top
 
Rpizerobottom.jpg|RPi0 bottom
 
</gallery>
 

Latest revision as of 13:36, 2 February 2020

Redirect to: