Difference between revisions of "Pi:Main Page"
From SpecNext official Wiki
| Line 3: | Line 3: | ||
The RPi0 has a Broadcom BCM2835 SoC with an ARMv6 core, a Videocore 4 GPU, and its own 512 MB memory and HDMI output. It has its own SD card from which it boots. | The RPi0 has a Broadcom BCM2835 SoC with an ARMv6 core, a Videocore 4 GPU, and its own 512 MB memory and HDMI output. It has its own SD card from which it boots. | ||
| − | [[Pi:NextPi]], the dedicated Linux distro for the Raspberry Pi 0 in the Next does not support the WiFi on the Pi0W. At this stage the Raspberry Pi cannot be used as a network interface for the Next. | + | [[Pi:NextPi|NextPi]], the dedicated Linux distro for the Raspberry Pi 0 in the Next does not support the WiFi on the Pi0W. At this stage the Raspberry Pi cannot be used as a network interface for the Next. |
== Attaching a Raspberry Pi Zero == | == Attaching a Raspberry Pi Zero == | ||
Revision as of 00:44, 8 October 2019
The Spectrum Next has a 40 pin (20x2) male header to which a Raspberry Pi Zero (RPi0) can be connected. It is labelled Accelerator Board on the main board.
The RPi0 has a Broadcom BCM2835 SoC with an ARMv6 core, a Videocore 4 GPU, and its own 512 MB memory and HDMI output. It has its own SD card from which it boots.
NextPi, the dedicated Linux distro for the Raspberry Pi 0 in the Next does not support the WiFi on the Pi0W. At this stage the Raspberry Pi cannot be used as a network interface for the Next.
Attaching a Raspberry Pi Zero
To connect the RPi0 to the Spectrum Next, a 20x2 pin female header needs to be attached on the underside of the Pi:
RPi0 top
RPi0 bottom
Male 40 pin header
RPi0 fitted
