Peripheral 2 Register

From SpecNext official Wiki
Revision as of 00:45, 31 January 2019 by wiki>Ped7g (Core 2.00.26 changes)
Jump to: navigation, search
Number $06
Readable Yes
Writable Yes
Short Description Enables Acceleration, Lightpen, DivMMC, Multiface, Mouse and AY audio.


Bit Function
7 Enable turbo mode key "F8", 0 = disabled (0 after PoR or Hard-reset)
6 DAC chip mode (0 = I2S, 1 = JAP) (Only VTrucco board, 0 after PoR or Hard-reset)
5 Enable Lightpen (1 = enabled) (0 after PoR or Hard-reset)
4 DivMMC automatic paging (1 = enabled) (0 after PoR or Hard-reset)
3 Enable Multiface (1 = enabled) (0 after PoR or Hard-reset)
2 PS/2 mode (0 = keyboard, 1 = mouse), exchanges the keyboard/mouse pins on the PS/2 connector (0 after PoR or Hard-reset)
1-0 Audio chip mode (%00 = YM, %01 = AY, %1x = Disabled)

The bit 7 doesn't prevent SW from setting up turbo mode by writing into CPU Speed Register ($07), it is used only to enable/disable the "F8" key toggle (core 2.00.24 information).