Difference between revisions of "Peripheral 2 Register"
From SpecNext official Wiki
(Adding bit mapping details) |
(Turbo enable/disable bit does affect only keyboard F8 reading) |
||
| Line 9: | Line 9: | ||
! Bit !! Function | ! Bit !! Function | ||
|- | |- | ||
| − | | 7 || Enable turbo mode, 0 = disabled (0 after PoR or Hard-reset) | + | | 7 || Enable turbo mode key "F8", 0 = disabled (0 after PoR or Hard-reset) |
|- | |- | ||
| 6 || DAC chip mode (0 = I2S, 1 = JAP) (Only VTrucco board, 0 after PoR or Hard-reset) | | 6 || DAC chip mode (0 = I2S, 1 = JAP) (Only VTrucco board, 0 after PoR or Hard-reset) | ||
| Line 23: | Line 23: | ||
| 1-0 || Audio chip mode (%00 = AY, %10 = YM, %10 = Disabled) (a typo in documentation, defining %10 twice, I *guess* YM is %01) | | 1-0 || Audio chip mode (%00 = AY, %10 = YM, %10 = Disabled) (a typo in documentation, defining %10 twice, I *guess* YM is %01) | ||
|} | |} | ||
| + | |||
| + | The bit 7 doesn't prevent SW from setting up turbo mode by writing into {{NextRegNo|$07}}, it is used only to enable/disable the "F8" key toggle (core 2.00.24 information). | ||
Revision as of 14:47, 28 January 2019
| Number | $06 |
|---|---|
| Readable | Yes |
| Writable | Yes |
| Short Description | Enables Acceleration, Lightpen, DivMMC, Multiface, Mouse and AY audio. |
| Bit | Function |
|---|---|
| 7 | Enable turbo mode key "F8", 0 = disabled (0 after PoR or Hard-reset) |
| 6 | DAC chip mode (0 = I2S, 1 = JAP) (Only VTrucco board, 0 after PoR or Hard-reset) |
| 5 | Enable Lightpen (1 = enabled) (0 after PoR or Hard-reset) |
| 4 | DivMMC automatic paging (1 = enabled) (0 after PoR or Hard-reset) |
| 3 | Enable Multiface (1 = enabled) (0 after PoR or Hard-reset) |
| 2 | PS/2 mode (0 = keyboard, 1 = mouse), exchanges the keyboard/mouse pins on the PS/2 connector (0 after PoR or Hard-reset) |
| 1-0 | Audio chip mode (%00 = AY, %10 = YM, %10 = Disabled) (a typo in documentation, defining %10 twice, I *guess* YM is %01) |
The bit 7 doesn't prevent SW from setting up turbo mode by writing into CPU Speed Register ($07), it is used only to enable/disable the "F8" key toggle (core 2.00.24 information).