Difference between revisions of "Internal Port Decoding b16-23 Register"

From SpecNext official Wiki
Jump to: navigation, search
(core 3.0 changes/refresh)
 
(core 3.0 changes/refresh)
Line 26: Line 26:
  
 
All bits are set to 1 upon soft reset.
 
All bits are set to 1 upon soft reset.
 +
 +
The internal port decoding enables always apply.
 +
 +
When the expansion bus is on, the expansion port decoding (Next Registers $86-$89) enables are logically ANDed with the internal enables (Next Registers $82-$85). A zero bit indicates the internal device is disabled.
 +
 +
If the expansion bus is on, this allows I/O cycles for disabled internal ports to propagate to the expansion bus, otherwise corresponding I/O cycles to the expansion bus are filtered.
  
 
(note: Next registers with number higher than $7F are inaccessible from Copper code)
 
(note: Next registers with number higher than $7F are inaccessible from Copper code)

Revision as of 09:16, 12 November 2019

Number $84
Readable Yes
Writable Yes
Short Description Enabling internal ports decoding
Bit Description
7 (bit 23) Enabling SpecDrum DAC Output ($xxDF / 223) (DAC mono Specdrum)
6 (bit 22) Enabling ($xxB3) (DAC mono GS Covox)
5 (bit 21) Enabling ($xxFB) (DAC mono Pentagon/ATM (sd mode 2 off))
4 (bit 20) Enabling ($xx0F) and ($xx4F) (DAC stereo Covox)
3 (bit 19) Enabling ($xx3F) and ($xx5F) (DAC stereo profi Covox)
2 (bit 18) Enabling ($xxF1), ($xxF3), ($xxF9) and ($xxFB) (DAC soundrive mode 2)
1 (bit 17) Enabling ($xx0F), Kempston Joystick ($xx1F / 31), ($xx4F) and ($xx5F) (DAC soundrive mode 1)
0 (bit 16) Enabling Turbo Sound Next Control ($FFFD / 65533) and Sound Chip Register Write ($BFFD / 49149)

All bits are set to 1 upon soft reset.

The internal port decoding enables always apply.

When the expansion bus is on, the expansion port decoding (Next Registers $86-$89) enables are logically ANDed with the internal enables (Next Registers $82-$85). A zero bit indicates the internal device is disabled.

If the expansion bus is on, this allows I/O cycles for disabled internal ports to propagate to the expansion bus, otherwise corresponding I/O cycles to the expansion bus are filtered.

(note: Next registers with number higher than $7F are inaccessible from Copper code)