Difference between revisions of "I2C data"

From SpecNext official Wiki
Jump to: navigation, search
m (3 revisions imported)
m
 
(5 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
{{Port
 
{{Port
 
|Number=$113B
 
|Number=$113B
 +
|NumberDec=4411
 +
|PortMask=%0001 0001 0011 1011 ??
 
|ShortDesc=Sets and reads the I2C SDA line
 
|ShortDesc=Sets and reads the I2C SDA line
 
|Readable=Yes
 
|Readable=Yes
 
|Writable=Yes
 
|Writable=Yes
 
|Subsystem=I2C
 
|Subsystem=I2C
|PortMask=%0001 0001 0011 1011 ??
 
 
}}
 
}}
 
When write, it sets the SDA line, D0 --> SDA
 
When write, it sets the SDA line, D0 --> SDA
Line 11: Line 12:
  
 
Note that I2C uses open collector outputs, the idle, released state is '1'. So if you want to read the line, you have to set it to '1' first.
 
Note that I2C uses open collector outputs, the idle, released state is '1'. So if you want to read the line, you have to set it to '1' first.
 +
 +
.

Latest revision as of 11:02, 4 May 2020

Number $113B
Decimal 4411
Short desc. Sets and reads the I2C SDA line
Bit Mask %0001 0001 0011 1011 ??
Readable Yes
Writable Yes
Subsystem I2C

When write, it sets the SDA line, D0 --> SDA When read, it reads the SDA line, SDA --> D0

Note that I2C uses open collector outputs, the idle, released state is '1'. So if you want to read the line, you have to set it to '1' first.

.