Difference between revisions of "Default Tilemap Attribute Register"
From SpecNext official Wiki
m (3 revisions imported) |
(cross-linking with main Tilemap article) |
||
| Line 17: | Line 17: | ||
|- | |- | ||
| 0 || If in 512-tile-mode: bit 8 of tile-id<br /> | | 0 || If in 512-tile-mode: bit 8 of tile-id<br /> | ||
| − | else draw priority: 1 = ULA over tilemap, 0 = tilemap over ULA | + | else draw priority: 1 = ULA over tilemap, 0 = [[Tilemap|tilemap]] over ULA |
|} | |} | ||
Revision as of 06:48, 23 May 2019
| Number | $6C |
|---|---|
| Readable | Yes |
| Writable | Yes |
| Short Description | Default tile attribute for 8-bit only maps. |
| Bit | Function |
|---|---|
| 7-4 | Palette Offset |
| 3 | X mirror |
| 2 | Y mirror |
| 1 | Rotate |
| 0 | If in 512-tile-mode: bit 8 of tile-id else draw priority: 1 = ULA over tilemap, 0 = tilemap over ULA |
This attribute is used for all tiles if bit 5 of Tilemap Control Register ($6B) is set.
When bit 1 of Tilemap Control Register ($6B) is set, the bit 0 of tile attribute works as ninth bit of tile-id (allowing 512 tiles in total), and the priority of layers is then "ULA over tilemap" as default.