Difference between revisions of "Datagear DMA Port"

From SpecNext official Wiki
Jump to: navigation, search
(core 3.1.3 changes/refresh)
m
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
{{Port
 
{{Port
 
|Number=$xx6B
 
|Number=$xx6B
|ShortDesc=Controls Z8410 DMA chip via Datagear standard.
+
|NumberDec=107
 +
|PortMask=---- ---- 0110 1011
 +
|ShortDesc=Controls zxnDMA chip
 
|Readable=Yes
 
|Readable=Yes
 
|Writable=Yes
 
|Writable=Yes
 
|Subsystem=DMA
 
|Subsystem=DMA
|PortMask=---- ---- 0110 1011
 
 
}}
 
}}
 
since core 3.1.2 this port $6B is always in "zxnDMA" mode, for "Zilog DMA" use {{PortNo|$xx0B}}.
 
since core 3.1.2 this port $6B is always in "zxnDMA" mode, for "Zilog DMA" use {{PortNo|$xx0B}}.

Latest revision as of 11:49, 4 May 2020

Number $xx6B
Decimal 107
Short desc. Controls zxnDMA chip
Bit Mask ---- ---- 0110 1011
Readable Yes
Writable Yes
Subsystem DMA

since core 3.1.2 this port $6B is always in "zxnDMA" mode, for "Zilog DMA" use MB02 DMA Port ($xx0B / 11).

Be aware the zxnDMA is by default in the new "zxnDMA" mode, acting slightly differently than original Zilog DMA.

Use Peripheral 2 Register ($06) to enable the "Zilog DMA" mode in case your SW expects Zilog-like behaviour of DMA transfers.