Difference between revisions of "CPU Speed Register"
From SpecNext official Wiki
(Core 2.00.22 changes.) |
|||
| Line 7: | Line 7: | ||
Bit 1-0 = turbo: %00 = 3.5MHz, %01 = 7MHz, %10 = 14MHz (%00 after PoR or Hard-reset). | Bit 1-0 = turbo: %00 = 3.5MHz, %01 = 7MHz, %10 = 14MHz (%00 after PoR or Hard-reset). | ||
| + | |||
| + | When 14MHz turbo is used, and [[Layer 2]] is enabled (bit 1 {{PortNo|$123B}}), the 14MHz speed is used only when BORDER/VBLANK/HBLANK areas of screen image are generated, during PAPER (centre 256x192 pixel area of screen) the CPU speed is dropped down to 7MHz. With [[Layer 2]] disabled, 14MHz CPU speed is stable. | ||
Reads actual CPU speed. | Reads actual CPU speed. | ||
Revision as of 02:49, 23 December 2018
| Number | $07 |
|---|---|
| Readable | Yes |
| Writable | Yes |
| Short Description | Sets accelerated clock speed, reads actual speed. |
Bit 1-0 = turbo: %00 = 3.5MHz, %01 = 7MHz, %10 = 14MHz (%00 after PoR or Hard-reset).
When 14MHz turbo is used, and Layer 2 is enabled (bit 1 Layer 2 Access Port ($123B / 4667)), the 14MHz speed is used only when BORDER/VBLANK/HBLANK areas of screen image are generated, during PAPER (centre 256x192 pixel area of screen) the CPU speed is dropped down to 7MHz. With Layer 2 disabled, 14MHz CPU speed is stable.
Reads actual CPU speed.