Difference between revisions of "Anti-brick Register"

From SpecNext official Wiki
Jump to: navigation, search
(core 3.0 changes/refresh)
Line 9: Line 9:
 
! Bit !! Effect
 
! Bit !! Effect
 
|-
 
|-
| 7-2 || Reserved, 0
+
| 7-2 || Reserved
 
|-
 
|-
| 1 || DivMMC button pressed  
+
| 1 || Button DRIVE (DivMMC) is pressed
 
|-
 
|-
| 0 || Multiface button pressed
+
| 0 || Button M1 (Multiface) is pressed
 
|}
 
|}
  

Revision as of 12:58, 11 November 2019

Number $10
Readable Yes
Writable Yes
Short Description Used within the Anti-brick system.

Read bit mapped:

Bit Effect
7-2 Reserved
1 Button DRIVE (DivMMC) is pressed
0 Button M1 (Multiface) is pressed

Write bit mapped (only in config mode):

Bit Effect
7 If 1 start selected core, if 0 FPGA loads the fixed anti-brick core
6-5 Reserved, must be 0
4-0 Core ID 0-31 (default is 2)

Note that in normal running pressing the DivMMC or Multiface button creates an NMI which halts any running program, and the reflashable core must be loaded before any user code is run. This means that unless you are rewriting the entire firmware from scratch this register is probably not useful.