Pi:Main Page

Raspberry Pi : Main Index

The Spectrum Next has a 40 pin (20x2) male header to which a Raspberry Pi Zero (RPi0) can be connected. It is labelled Accelerator Board on the main board.

The RPi0 has a Broadcom BCM2835 SoC with an ARMv6 core, a Videocore 4 GPU, and its own 512 MB memory and HDMI output. It has its own SD card from which it boots.

Hardware

Attach a Raspberry Pi Zero to the Spectrum Next, use a 20x2 pin female header needs to be attached on the underside of the Pi:

• 

  RPi0 top

• 

  RPi0 bottom

• 

  Male 40 pin header

• 

  RPi0 fitted

Software

NextPi, the dedicated Linux distro for the Raspberry Pi 0 in the Next does not support the WiFi on the Pi0W. At this stage the Raspberry Pi cannot be used as a network interface for the Next.