UART TX
From SpecNext official Wiki
Revision as of 08:33, 24 November 2017 by wiki>Omikron (Created page with "{{Port |Number=0x133b |ShortDesc=Sends byte to serial port. If read, tells if data in RX buffer |Readable=Yes |Writable=Yes |Subsystem=UART }} Write to this port sends the byt...")
| Number | 0x133b |
|---|---|
| Decimal | |
| Short desc. | Sends byte to serial port. If read, tells if data in RX buffer |
| Bit Mask | |
| Readable | Yes |
| Writable | Yes |
| Subsystem | UART |
Write to this port sends the byte to serial port (routed to WiFi module connector). Read from this port returns 0 if there are bytes to read in RX FIFO buffer, or 1 if no RX data.