Video Timing Register
From SpecNext Wiki
| Number | TBRegisterNumber::$11 |
|---|---|
| Readable | TBRegisterReadable::Yes |
| Writable | TBRegisterWritable::Yes |
| Short Description | ShortDesc::Sets video output timing variant. |
(writable in config mode only)
| Bit | Function |
|---|---|
| 7-3 | Reserved, must be 0 |
| 2-0 | video signal timing variant |
Possible timing variants:
| Bit pattern | selected variant |
|---|---|
| %000 | Base VGA timing, clk28 = 28000000 |
| %001 | VGA setting 1, clk28 = 28571429 |
| %010 | VGA setting 2, clk28 = 29464286 |
| %011 | VGA setting 3, clk28 = 30000000 |
| %100 | VGA setting 4, clk28 = 31000000 |
| %101 | VGA setting 5, clk28 = 32000000 |
| %110 | VGA setting 6, clk28 = 33000000 |
| %111 | HDMI, clk28 = 27000000 |
Each VGA setting increases the frequency by approximately 1 kHz.
50/60Hz depending on bit 2 of {{#ask: TBRegisterNumber::$05 }} ($05).