ULA Control Register
From SpecNext official Wiki
| Number | $68 |
|---|---|
| Readable | Yes |
| Writable | Yes |
| Short Description | Disables ULA completely and controls its mixing with Tilemap layer. |
| Bit | Function |
|---|---|
| 7 | 1 to disable ULA output |
| 6 | 0 to select the ULA colour for blending in SLU modes 6 & 7
1 to select the ULA/tilemap mix for blending in SLU modes 6 & 7 |
| 5-1 | Reserved, must be 0 |
| 0 | 1 to enable stencil mode when both the ULA and tilemap are enabled
(if either are transparent the result is transparent otherwise the result is a logical AND of both colours) |
Bit 0 can be set to choose stencil mode for the combined output of the ULA and tilemap.
Bit 6 determines what colour is used in SLU modes 6 & 7 where the ULA is combined with Layer 2 to generate highlighting effects.
Default value is 0.