UART TX: Difference between revisions
From SpecNext Wiki
Created page with "{{Port |Number=0x133b |ShortDesc=Sends byte to serial port. If read, tells if data in RX buffer |Readable=Yes |Writable=Yes |Subsystem=UART }} Write to this port sends the byt..." |
No edit summary |
||
| Line 2: | Line 2: | ||
|Number=0x133b | |Number=0x133b | ||
|ShortDesc=Sends byte to serial port. If read, tells if data in RX buffer | |ShortDesc=Sends byte to serial port. If read, tells if data in RX buffer | ||
|PortMask=%0001 0011 0011 1011 ?? | |||
|Readable=Yes | |Readable=Yes | ||
|Writable=Yes | |Writable=Yes | ||
Revision as of 08:41, 24 November 2017
| Number | PortNumber::0x133b |
|---|---|
| Decimal | NumberDec:: |
| Short desc. | ShortDesc::Sends byte to serial port. If read, tells if data in RX buffer |
| Bit Mask | [[PortMask::%0001 0011 0011 1011 ??]] |
| Readable | Readable::Yes |
| Writable | Writable::Yes |
| Subsystem | Subsystem::UART |
Write to this port sends the byte to serial port (routed to WiFi module connector). Read from this port returns 0 if there are bytes to read in RX FIFO buffer, or 1 if no RX data.