Plus 3 Memory Paging Control: Difference between revisions
From SpecNext Wiki
Created page with "{{Port |Number=$1FFD |ShortDesc=Controls ROM paging and special paging options from the +2a/+3. |Readable=No |Writable=Yes |Subsystem=Memory Map }} Bit mapped to control pagin..." |
No edit summary |
||
| Line 4: | Line 4: | ||
|Readable=No | |Readable=No | ||
|Writable=Yes | |Writable=Yes | ||
|Subsystem=Memory | |Subsystem=Memory map | ||
}} | }} | ||
Bit mapped to control paging options. | Bit mapped to control paging options. | ||
| Line 19: | Line 19: | ||
| 2 || Normal mode: High bit of ROM selection. | | 2 || Normal mode: High bit of ROM selection. | ||
Special mode: High bit of memory configuration number. | Special mode: High bit of memory configuration number (see [[Memory map]]). | ||
|- | |- | ||
| 1 || Special mode: Low bit of memory configuration number. | | 1 || Special mode: Low bit of memory configuration number. | ||
| Line 25: | Line 25: | ||
| 0 || Paging mode. 0=Normal, 1=Special. | | 0 || Paging mode. 0=Normal, 1=Special. | ||
|} | |} | ||
Any values written to this port should also be stored in $5X67 if you intend to use any OS routines. | |||
Revision as of 17:23, 18 August 2017
| Number | PortNumber::$1FFD |
|---|---|
| Decimal | NumberDec:: |
| Short desc. | ShortDesc::Controls ROM paging and special paging options from the +2a/+3. |
| Bit Mask | PortMask:: |
| Readable | Readable::No |
| Writable | Writable::Yes |
| Subsystem | Subsystem::Memory map |
Bit mapped to control paging options.
| Bit | Effect |
|---|---|
| 5-7 | Undocumented |
| 4 | Printer Port Strobe |
| 3 | Disk motor enable |
| 2 | Normal mode: High bit of ROM selection.
Special mode: High bit of memory configuration number (see Memory map). |
| 1 | Special mode: Low bit of memory configuration number. |
| 0 | Paging mode. 0=Normal, 1=Special. |
Any values written to this port should also be stored in $5X67 if you intend to use any OS routines.