Difference between revisions of "Peripheral 3 Register"
From SpecNext official Wiki
(added bit information from specnext site.) |
|||
| Line 5: | Line 5: | ||
|ShortDesc=Enables [[Stereo]], Internal Speaker, [[SpecDrum]], [[Enhanced ULA|Timex Video Modes]], [[Turbo Sound Next]] and NTSC/PAL selection. | |ShortDesc=Enables [[Stereo]], Internal Speaker, [[SpecDrum]], [[Enhanced ULA|Timex Video Modes]], [[Turbo Sound Next]] and NTSC/PAL selection. | ||
}} | }} | ||
| + | |||
| + | (R/W) 0x08 (08) => Peripheral 3 setting: | ||
| + | bit 7 = 128K paging enable (inverse of port 0x7ffd, bit 5) | ||
| + | Unlike the paging lock in port 0x7ffd, | ||
| + | this may be enabled or disabled at any time. | ||
| + | Use "1" to disable the locked paging. | ||
| + | bit 6 = "1" to disable RAM contention. (0 after a reset) | ||
| + | bit 5 = Stereo mode (0 = ABC, 1 = ACB)(0 after a PoR or Hard-reset) | ||
| + | bit 4 = Enable internal speaker (1 = enabled)(1 after a PoR or Hard-reset) | ||
| + | bit 3 = Enable Specdrum/Covox (1 = enabled)(0 after a PoR or Hard-reset) | ||
| + | bit 2 = Enable Timex modes (1 = enabled)(0 after a PoR or Hard-reset) | ||
| + | bit 1 = Enable TurboSound (1 = enabled)(0 after a PoR or Hard-reset) | ||
| + | bit 0 = Reserved, must be 0 | ||
| + | |||
| + | https://www.specnext.com/tbblue-io-port-system/ | ||
Revision as of 00:20, 6 November 2018
| Number | $08 |
|---|---|
| Readable | Yes |
| Writable | Yes |
| Short Description | Enables Stereo, Internal Speaker, SpecDrum, Timex Video Modes, Turbo Sound Next and NTSC/PAL selection. |
(R/W) 0x08 (08) => Peripheral 3 setting:
bit 7 = 128K paging enable (inverse of port 0x7ffd, bit 5)
Unlike the paging lock in port 0x7ffd,
this may be enabled or disabled at any time.
Use "1" to disable the locked paging.
bit 6 = "1" to disable RAM contention. (0 after a reset)
bit 5 = Stereo mode (0 = ABC, 1 = ACB)(0 after a PoR or Hard-reset)
bit 4 = Enable internal speaker (1 = enabled)(1 after a PoR or Hard-reset)
bit 3 = Enable Specdrum/Covox (1 = enabled)(0 after a PoR or Hard-reset)
bit 2 = Enable Timex modes (1 = enabled)(0 after a PoR or Hard-reset)
bit 1 = Enable TurboSound (1 = enabled)(0 after a PoR or Hard-reset)
bit 0 = Reserved, must be 0