Difference between revisions of "Enhanced ULA Palette Extension"
m (Mikecad moved page ULANext Palette Extension to Enhanced ULA Palette Extension without leaving a redirect: ULANext deprecated) |
m ("Enhanced ULA") |
||
| Line 3: | Line 3: | ||
|Readable=Yes | |Readable=Yes | ||
|Writable=Yes | |Writable=Yes | ||
| − | |ShortDesc=Use to set 9-bit (2-byte) colours of the | + | |ShortDesc=Use to set 9-bit (2-byte) colours of the Enhanced ULA palette, or to read second byte of colour. |
}} | }} | ||
Two consecutive writes are needed to write the 9 bit colour: | Two consecutive writes are needed to write the 9 bit colour: | ||
Revision as of 15:15, 26 April 2019
| Number | $44 |
|---|---|
| Readable | Yes |
| Writable | Yes |
| Short Description | Use to set 9-bit (2-byte) colours of the Enhanced ULA palette, or to read second byte of colour. |
Two consecutive writes are needed to write the 9 bit colour:
- 1st write: bits 7-0 = RRRGGGBB
- 2nd write: bits 7-1 are reserved, must be 0 (except bit 7 for Layer 2), bit 0 = lsb B
(to detect whether first or second write is expected, one can read bit 7 of Machine Type Register ($03), in case your code is not aware of current state)
If writing the Layer 2 palette colour, in the second byte, bit 7 is "priority" bit. Priority colour will be always on top (drawn above all other layers), even on a priority arrangement like "USL" . If you need the exact same colour with priority and non priority, you will need to program the same colour twice, changing bit 7 to 0 for the non priority colour alternative.
After the write of second byte, the palette index is auto-incremented, if the auto-increment is enabled by Enhanced ULA Control Register ($43).
The read will always read the second byte of colour (%p000000B) and it will not modify the index.
The modified palette remains until a Hard Reset.