Kempston Joystick 2, Joystick I/O

Number	PortNumber::$xx37
Decimal	NumberDec::
Short desc.	ShortDesc::Kempston interface second joystick variant and controls joystick I/O.
Bit Mask	PortMask::
Readable	Readable::Yes
Writable	Writable::Yes
Subsystem	Subsystem::Input

For READ functionality the details are identical with {{#ask: PortNumber::$xx1F }} ($xx1F{{#ask: PortNumber::$xx1F |mainlabel=- |headers=hide |intro= /  |?NumberDec#- }})

Since core3.1.5 there is option to do I/O operations through joystick ports.

The I/O mode should be set by writing this port first followed by enabling I/O mode on the joysticks with a write to {{#ask: TBRegisterNumber::$05 }} ($05).

The WRITE functionality:

Bit	Function
7-6	select I/O mode: %00 = bit bang, %01 = clock, %10 = uart
5	Reserved must be 0
4	0 to read "input" part of I/O from left joystick socket, 1 to read from right joystick socket
3-1	Reserved must be 0
0	parameter bit controls state of pin 7 on both joystick connectors: bit bang: bit 0 is copied to pin 7 clock: 0 = place slow clock on pin 7 (Fsys/2048 = 13.672kHz), 1 = place fast clock on pin 7 (Fsys/8 = 3.5MHz) † uart: 0 = redirect esp uart to joystick connector, 1 = redirect pi uart to joystick connector (Tx appears on pin 7, Rx taken from pin 9)

† A runt clock pulse may appear in the first cycle, minimum pulse width is 1/Fsys = 35.7ns