Difference between revisions of "UART TX"
From SpecNext official Wiki
(Forced Save) |
m |
||
| Line 5: | Line 5: | ||
|Writable=Yes | |Writable=Yes | ||
|Subsystem=UART | |Subsystem=UART | ||
| − | |PortMask=%0001 0011 0011 1011 | + | |PortMask=%0001 0011 0011 1011 |
}} | }} | ||
Write to this port sends the byte to serial port (routed to WiFi module connector). | Write to this port sends the byte to serial port (routed to WiFi module connector). | ||
Read from this port returns 0 if there are bytes to read in RX FIFO buffer, or 1 if no RX data. | Read from this port returns 0 if there are bytes to read in RX FIFO buffer, or 1 if no RX data. | ||
Revision as of 01:04, 16 April 2020
| Number | $133B |
|---|---|
| Decimal | |
| Short desc. | Sends byte to serial port. If read, tells if data in RX buffer |
| Bit Mask | %0001 0011 0011 1011 |
| Readable | Yes |
| Writable | Yes |
| Subsystem | UART |
Write to this port sends the byte to serial port (routed to WiFi module connector). Read from this port returns 0 if there are bytes to read in RX FIFO buffer, or 1 if no RX data.