Difference between revisions of "Clip Window Layer 2 Register"
m (4 revisions imported) |
m |
||
| Line 28: | Line 28: | ||
The displayed area is "inclusive", i.e. for default values full 256x192 pixel area is displayed. | The displayed area is "inclusive", i.e. for default values full 256x192 pixel area is displayed. | ||
| + | |||
| + | For Layer 2 modes ({{NextRegNo|$70}}) with higher X resolution than 256 the X clip coordinates are doubled (320x256) or quadrupled (640x256) in same way how Sprites and Tilemap clip window works. | ||
Latest revision as of 18:43, 14 August 2024
| Number | $18 |
|---|---|
| Readable | Yes |
| Writable | Yes |
| Short Description | Sets and reads clip-window for Layer 2. |
The coordinates are stored under index:
| Index | Coordinate |
|---|---|
| 0 | X1 position |
| 1 | X2 position |
| 2 | Y1 position |
| 3 | Y2 position |
The current read/write index (which coordinate is selected) can be read or reset by Clip Window Control Register ($1C).
Write to register will modify currently selected coordinate, and auto-increment index (wrapping from 3 to 0).
Read from register will only read currently selected coordinate, index is not modified (to read next coordinate, write the current coordinate value back, to increment index).
The coordinate values are 0,255,0,191 after a Reset.
The displayed area is "inclusive", i.e. for default values full 256x192 pixel area is displayed.
For Layer 2 modes (Layer 2 Control Register ($70)) with higher X resolution than 256 the X clip coordinates are doubled (320x256) or quadrupled (640x256) in same way how Sprites and Tilemap clip window works.