Peripheral 3 Setting Register: Difference between revisions
From SpecNext Wiki
added bit information from specnext site. |
Adjusted summary to be more accurate (removing obsolete NTSC/PAL mention) |
||
| Line 3: | Line 3: | ||
|Readable=Yes | |Readable=Yes | ||
|Writable=Yes | |Writable=Yes | ||
|ShortDesc= | |ShortDesc=ABC/ACB [[Stereo]], Internal Speaker, [[SpecDrum]], [[Enhanced ULA|Timex Video Modes]], [[Turbo Sound Next]], RAM contention and [un]lock 128k paging. | ||
}} | }} | ||
Revision as of 17:09, 11 February 2019
| Number | TBRegisterNumber::$08 |
|---|---|
| Readable | TBRegisterReadable::Yes |
| Writable | TBRegisterWritable::Yes |
| Short Description | [[ShortDesc::ABC/ACB Stereo, Internal Speaker, SpecDrum, Timex Video Modes, Turbo Sound Next, RAM contention and [un]lock 128k paging.]] |
(R/W) 0x08 (08) => Peripheral 3 setting:
bit 7 = 128K paging enable (inverse of port 0x7ffd, bit 5)
Unlike the paging lock in port 0x7ffd,
this may be enabled or disabled at any time.
Use "1" to disable the locked paging.
bit 6 = "1" to disable RAM contention. (0 after a reset)
bit 5 = Stereo mode (0 = ABC, 1 = ACB)(0 after a PoR or Hard-reset)
bit 4 = Enable internal speaker (1 = enabled)(1 after a PoR or Hard-reset)
bit 3 = Enable Specdrum/Covox (1 = enabled)(0 after a PoR or Hard-reset)
bit 2 = Enable Timex modes (1 = enabled)(0 after a PoR or Hard-reset)
bit 1 = Enable TurboSound (1 = enabled)(0 after a PoR or Hard-reset)
bit 0 = Reserved, must be 0