Circuit Diagrams: Difference between revisions
From SpecNext Wiki
No edit summary |
Added three tail keyboard schematic. |
||
| Line 2: | Line 2: | ||
The Issue 2B (rev 1) schematic can be downloaded [https://gitlab.com/thesmog358/tbblue/-/raw/master/docs/schematics/specnext-schematics.pdf?inline=false here]. | The Issue 2B (rev 1) schematic can be downloaded [https://gitlab.com/thesmog358/tbblue/-/raw/master/docs/schematics/specnext-schematics.pdf?inline=false here]. | ||
The thee tail matrix keyboard schematic can be downloaded [https://github.com/Threetwosevensixseven/NXtel/wiki/images/NS58A-5-01-04.pdf here]. | |||
== J13 - Daughter board connector == | == J13 - Daughter board connector == | ||
Revision as of 11:26, 30 May 2023
Schematic
The Issue 2B (rev 1) schematic can be downloaded here.
The thee tail matrix keyboard schematic can be downloaded here.
J13 - Daughter board connector
|
|
J15 - Next GPIO
|
|
CN5 - Expansion bus (edge connector)
|
|
J10/J11 - Memory Expansion Ports
|
|
J4/J7 J8/J14 - Joystick Ports
|
|
CN1 - VGA Video Port
|
|
Notes:
- In VGA mode (scandoubler enabled), H-SYNC and V-SYNC are carried separately on their respective pins.
- In RGB mode (scandoubler disabled), H-SYNC carries composite sync, and V-SYNC carries 1.
- Pin 14 carries 3V3, which can be connected to SCART pin 16 to indicate RGB to the display.
- There is no convenient source of voltages between 9.5-12V to indicate 4:3 aspect ratio to the display on SCART pin 8, so this is usually left unconnected.
CN8 - Digital Port
|
|
CN2/CN6/CN7 - SD Reader (Mainboard) (CN6 on reverse)
|
|
CN10/CN11/CN12 - SD Reader (Daughterboard) (CN12 on reverse)
|
|
Accelerator Board
|
|
Real Time Clock (RTC)
|
|
CN9 - ESP8266-01/RS-232 Port
|
|
|