Difference between revisions of "Circuit Diagrams"
From SpecNext official Wiki
| Line 58: | Line 58: | ||
* In VGA mode (scandoubler enabled), H-SYNC and V-SYNC are carried separately on their respective pins. | * In VGA mode (scandoubler enabled), H-SYNC and V-SYNC are carried separately on their respective pins. | ||
* In RGB mode (scandoubler disabled), H-SYNC carries composite sync, and V-SYNC carries 1. | * In RGB mode (scandoubler disabled), H-SYNC carries composite sync, and V-SYNC carries 1. | ||
| + | * Pin 14 carries 3V3, which can be connected to SCART pin 16 to signal RGB. | ||
| + | * There is no convenience source of voltages between 9.5-12V to signify 4:3 aspect ratio on SCART pin 8, so this is usually left unconnected. | ||
<br/> | <br/> | ||
Revision as of 20:26, 3 May 2020
Contents
- 1 Schematic
- 2 J13 - Daughter board connector
- 3 J15 - Next GPIO
- 4 CN5 - Expansion bus (edge connector)
- 5 J10/J11 - Memory Expansion Ports
- 6 J4/J7 J8/J14 - Joystick Ports
- 7 CN1 - VGA Video Port
- 8 CN8 - Digital Port
- 9 CN2/CN6/CN7 - SD Reader (Mainboard) (CN6 on reverse)
- 10 CN10/CN11/CN12 - SD Reader (Daughterboard) (CN12 on reverse)
- 11 Accelerator Board
- 12 Real Time Clock (RTC)
- 13 CN9 - ESP8266-01/RS-232 Port
Schematic
The Issue 2B (rev 1) schematic can be downloaded here.
J13 - Daughter board connector
|
|
J15 - Next GPIO
|
|
CN5 - Expansion bus (edge connector)
|
|
J10/J11 - Memory Expansion Ports
|
|
J4/J7 J8/J14 - Joystick Ports
|
|
CN1 - VGA Video Port
|
|
Notes:
- In VGA mode (scandoubler enabled), H-SYNC and V-SYNC are carried separately on their respective pins.
- In RGB mode (scandoubler disabled), H-SYNC carries composite sync, and V-SYNC carries 1.
- Pin 14 carries 3V3, which can be connected to SCART pin 16 to signal RGB.
- There is no convenience source of voltages between 9.5-12V to signify 4:3 aspect ratio on SCART pin 8, so this is usually left unconnected.
CN8 - Digital Port
|
|
CN2/CN6/CN7 - SD Reader (Mainboard) (CN6 on reverse)
|
|
CN10/CN11/CN12 - SD Reader (Daughterboard) (CN12 on reverse)
|
|
Accelerator Board
|
|
Real Time Clock (RTC)
|
|
CN9 - ESP8266-01/RS-232 Port
|
|
|