Difference between revisions of "UART RX"
From SpecNext official Wiki
m |
m |
||
| Line 1: | Line 1: | ||
{{Port | {{Port | ||
|Number=$143B | |Number=$143B | ||
| + | |NumberDec=5179 | ||
| + | |PortMask=%0001 0100 0011 1011 | ||
|ShortDesc=Reads data from serial port, write sets the baudrate | |ShortDesc=Reads data from serial port, write sets the baudrate | ||
|Readable=Yes | |Readable=Yes | ||
|Writable=Yes | |Writable=Yes | ||
|Subsystem=UART | |Subsystem=UART | ||
| − | |||
}} | }} | ||
Reads data from serial port. Write to this port sets the speed of serial communication, see the table: | Reads data from serial port. Write to this port sets the speed of serial communication, see the table: | ||
Revision as of 11:03, 4 May 2020
| Number | $143B |
|---|---|
| Decimal | 5179 |
| Short desc. | Reads data from serial port, write sets the baudrate |
| Bit Mask | %0001 0100 0011 1011 |
| Readable | Yes |
| Writable | Yes |
| Subsystem | UART |
Reads data from serial port. Write to this port sets the speed of serial communication, see the table:
0 = 115200 (default at reset) 1 = 57600 2 = 38400 3 = 19200 4 = 9600 5 = 4800 6 = 2400