UART Control: Difference between revisions
From SpecNext Wiki
core 3.1.4 changes/refresh |
mNo edit summary |
||
| Line 1: | Line 1: | ||
{{Port | {{Port | ||
|Number=$153B | |Number=$153B | ||
|NumberDec=5435 | |||
|PortMask=%0001 0101 0011 1011 | |||
|ShortDesc=Configuration of UART interfaces | |ShortDesc=Configuration of UART interfaces | ||
|Readable=Yes | |Readable=Yes | ||
|Writable=Yes | |Writable=Yes | ||
|Subsystem=UART | |Subsystem=UART | ||
}} | }} | ||
: bit 6 = 0 to select the esp uart, 1 to select the pi uart † | : bit 6 = 0 to select the esp uart, 1 to select the pi uart † | ||
Revision as of 11:04, 4 May 2020
| Number | PortNumber::$153B |
|---|---|
| Decimal | NumberDec::5435 |
| Short desc. | ShortDesc::Configuration of UART interfaces |
| Bit Mask | [[PortMask::%0001 0101 0011 1011]] |
| Readable | Readable::Yes |
| Writable | Writable::Yes |
| Subsystem | Subsystem::UART |
- bit 6 = 0 to select the esp uart, 1 to select the pi uart †
- bit 4 = 1 if the bits 2:0 are being written
- bits 2:0 = most significant bits of the 17-bit prescalar setting baud rate
pi gpio must be configured for uart, see {{#ask: TBRegisterNumber::$A0 }} ($A0)
† either uart can be redirected to the joystick ports, see {{#ask: PortNumber::$xx37 }} ($xx37{{#ask: PortNumber::$xx37 |mainlabel=- |headers=hide |intro= / |?NumberDec#- }})