Difference between revisions of "Default Tilemap Attribute Register"
From SpecNext official Wiki
(Core 2.00.27 changes.) |
(Core 2.00.27 changes.) |
||
| Line 16: | Line 16: | ||
| 1 || Rotate | | 1 || Rotate | ||
|- | |- | ||
| − | | 0 || | + | | 0 || If in 512-tile-mode: bit 8 of tile-id<br /> |
| + | else draw priority: 1 = ULA over tilemap, 0 = tilemap over ULA | ||
|} | |} | ||
Revision as of 07:55, 14 February 2019
| Number | $6C |
|---|---|
| Readable | Yes |
| Writable | Yes |
| Short Description | Default tile attribute for 8-bit only maps. |
| Bit | Function |
|---|---|
| 7-4 | Palette Offset |
| 3 | X mirror |
| 2 | Y mirror |
| 1 | Rotate |
| 0 | If in 512-tile-mode: bit 8 of tile-id else draw priority: 1 = ULA over tilemap, 0 = tilemap over ULA |
This attribute is used for all tiles if bit 5 of Tilemap Control Register ($6B) is set.
When bit 1 of Tilemap Control Register ($6B) is set, the bit 0 of tile attribute works as ninth bit of tile-id (allowing 512 tiles in total), and the priority of layers is then "ULA over tilemap" as default.