Difference between revisions of "Copper Data"
From SpecNext official Wiki
m (3 revisions imported) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 5: | Line 5: | ||
|ShortDesc=Used to upload code to the [[Copper]]. | |ShortDesc=Used to upload code to the [[Copper]]. | ||
}} | }} | ||
| − | After the write, the index is auto-incremented to the next memory position. | + | After the write, the index is auto-incremented to the next memory position. The index wraps to zero when the last BYTE of program RAM is written (position 2047). |
Each Copper instruction is composed by two bytes (16 bits) - two writes are required to complete one instruction upload. | Each Copper instruction is composed by two bytes (16 bits) - two writes are required to complete one instruction upload. | ||
Latest revision as of 09:59, 14 April 2019
| Number | $60 |
|---|---|
| Readable | No |
| Writable | Yes |
| Short Description | Used to upload code to the Copper. |
After the write, the index is auto-incremented to the next memory position. The index wraps to zero when the last BYTE of program RAM is written (position 2047).
Each Copper instruction is composed by two bytes (16 bits) - two writes are required to complete one instruction upload.