Difference between revisions of "Peripheral 3 Register"
From SpecNext official Wiki
m |
|||
| (13 intermediate revisions by 5 users not shown) | |||
| Line 3: | Line 3: | ||
|Readable=Yes | |Readable=Yes | ||
|Writable=Yes | |Writable=Yes | ||
| − | |ShortDesc= | + | |ShortDesc=ABC/ACB [[Stereo]], Internal Speaker, [[SpecDrum]], [[Enhanced ULA|Timex Video Modes]], [[Turbo Sound Next]], RAM contention and [un]lock 128k paging. |
}} | }} | ||
| + | (R/W) 0x08 (08) => Peripheral 3 setting: | ||
| + | bit 7 = Unlock(1)/lock(0) port $7FFD paging (read 1 indicates port $7FFD is not locked) | ||
| + | bit 6 = 1 to disable RAM and I/O port contention (soft reset = 0) | ||
| + | bit 5 = AY stereo mode (0 = ABC, 1 = ACB) (hard reset = 0) | ||
| + | bit 4 = Enable internal speaker (hard reset = 1) | ||
| + | bit 3 = Enable 8-bit DACs (A,B,C,D) (hard reset = 0) | ||
| + | bit 2 = Enable port $FF Timex video mode *read* (hides floating bus on 0xff) (hard reset = 0) | ||
| + | bit 1 = Enable Turbosound (currently selected AY is frozen when disabled) (hard reset = 0) | ||
| + | bit 0 = Implement Issue 2 keyboard (port $FE reads as early ZX boards) (hard reset = 0) | ||
| + | |||
| + | The Timex modes are operational even when bit 2 is set to zero, you can still write to port $FF with desired mode changes. Bit 2 does only enable readability of port $FF. | ||
| + | |||
| + | When loading 48k SNA files through NextZXOS, be aware it does lock down many features of Next to better simulate ZX48 machine, including lock of {{PortNo|$7FFD}} paging feature. If you are using 48k SNA file for convenience, but you are actually using full ZX Next features, make sure you enable/unlock all relevant bits, before using the particular feature. | ||
Latest revision as of 00:05, 16 April 2020
| Number | $08 |
|---|---|
| Readable | Yes |
| Writable | Yes |
| Short Description | ABC/ACB Stereo, Internal Speaker, SpecDrum, Timex Video Modes, Turbo Sound Next, RAM contention and [un]lock 128k paging. |
(R/W) 0x08 (08) => Peripheral 3 setting:
bit 7 = Unlock(1)/lock(0) port $7FFD paging (read 1 indicates port $7FFD is not locked) bit 6 = 1 to disable RAM and I/O port contention (soft reset = 0) bit 5 = AY stereo mode (0 = ABC, 1 = ACB) (hard reset = 0) bit 4 = Enable internal speaker (hard reset = 1) bit 3 = Enable 8-bit DACs (A,B,C,D) (hard reset = 0) bit 2 = Enable port $FF Timex video mode *read* (hides floating bus on 0xff) (hard reset = 0) bit 1 = Enable Turbosound (currently selected AY is frozen when disabled) (hard reset = 0) bit 0 = Implement Issue 2 keyboard (port $FE reads as early ZX boards) (hard reset = 0)
The Timex modes are operational even when bit 2 is set to zero, you can still write to port $FF with desired mode changes. Bit 2 does only enable readability of port $FF.
When loading 48k SNA files through NextZXOS, be aware it does lock down many features of Next to better simulate ZX48 machine, including lock of Memory Paging Control ($7FFD / 32765) paging feature. If you are using 48k SNA file for convenience, but you are actually using full ZX Next features, make sure you enable/unlock all relevant bits, before using the particular feature.