Difference between revisions of "Layer 2 RAM Page Register"
(core 3.0.7 changes/refresh) |
|||
| (9 intermediate revisions by 5 users not shown) | |||
| Line 3: | Line 3: | ||
|Readable=Yes | |Readable=Yes | ||
|Writable=Yes | |Writable=Yes | ||
| + | |ShortDesc=Sets the [[Memory map|bank]] number where Layer 2 video memory begins. | ||
}} | }} | ||
| + | Bits 6-0 store the number of the "SRAM page" (ie, [[Memory map|bank]]) used for the standard Layer 2 screen. The default is 8. Because the layer 2 screen is 48kiB, it actually occupies 3 banks, and the number set here is the first; so by default, it occupies banks 8-10. Then later NextZXOS does reconfigure both this and shadow bank to 9 (banks 9-11). (bit 7 is reserved, use always 0) | ||
| + | |||
| + | For shadow bank paging see [[Layer_2]] and {{NextRegNo|$13}}. | ||
| + | |||
| + | Note that this register uses the 16kiB bank method, so if you set Nextreg $12,$C if you need to read the contents via 8kb banks you would need to multiply x 2 (16k bank $0C is identical to 8k pages $18 and $19). | ||
| + | |||
| + | Valid values are 0 to 109 (with 2MiB SRAM memory extension, 0 to 45 with default 1MiB memory). | ||
| + | |||
| + | The new 320x256x8 and 640x256x4 Layer 2 modes require 80kiB of memory, i.e. five 16k banks. The valid values are then 0 to 107 (2MiB extended) or 0 to 43 with default 1MiB model. | ||
Latest revision as of 14:52, 15 January 2020
| Number | $12 |
|---|---|
| Readable | Yes |
| Writable | Yes |
| Short Description | Sets the bank number where Layer 2 video memory begins. |
Bits 6-0 store the number of the "SRAM page" (ie, bank) used for the standard Layer 2 screen. The default is 8. Because the layer 2 screen is 48kiB, it actually occupies 3 banks, and the number set here is the first; so by default, it occupies banks 8-10. Then later NextZXOS does reconfigure both this and shadow bank to 9 (banks 9-11). (bit 7 is reserved, use always 0)
For shadow bank paging see Layer_2 and Layer 2 RAM Shadow Page Register ($13).
Note that this register uses the 16kiB bank method, so if you set Nextreg $12,$C if you need to read the contents via 8kb banks you would need to multiply x 2 (16k bank $0C is identical to 8k pages $18 and $19).
Valid values are 0 to 109 (with 2MiB SRAM memory extension, 0 to 45 with default 1MiB memory).
The new 320x256x8 and 640x256x4 Layer 2 modes require 80kiB of memory, i.e. five 16k banks. The valid values are then 0 to 107 (2MiB extended) or 0 to 43 with default 1MiB model.