Tilemap Base Address Register

Number	$6E
Readable	Yes
Writable	Yes
Short Description	Base address of the 40x32 or 80x32 tile map (similar to text-mode of other computers).

bits 7-6 = Read back as zero, write values ignored

bits 5-0 = MSB of address of the tilemap in Bank 5

The value written is an offset into Bank 5 allowing the tilemap to be placed at any multiple of 256 bytes.

Writing a physical MSB address as $40-$7F or $C0-$FF range is permitted (the top bits will be ignored).

The value read back may be treated as a full 8-bit value (with the top two bits equal to zero), i.e. upon writing value $45 the read of this register will produce value $05 (contrary to "reserved" bits in other registers, where read-value should be not assumed by code using it and masking by AND is recommended).