I2C clock: Difference between revisions
From SpecNext Wiki
m 3 revisions imported |
mNo edit summary |
||
| Line 1: | Line 1: | ||
{{Port | {{Port | ||
|Number=$103B | |Number=$103B | ||
|NumberDec=4155 | |||
|PortMask=%0001 0000 0011 1011 ?? | |||
|ShortDesc=Sets and reads the I2C SCL line. | |ShortDesc=Sets and reads the I2C SCL line. | ||
|Readable=Yes | |Readable=Yes | ||
|Writable=Yes | |Writable=Yes | ||
|Subsystem=I2C | |Subsystem=I2C | ||
}} | }} | ||
When write, it sets the SCL line, D0 --> SCL | When write, it sets the SCL line, D0 --> SCL | ||
Latest revision as of 11:01, 4 May 2020
| Number | PortNumber::$103B |
|---|---|
| Decimal | NumberDec::4155 |
| Short desc. | ShortDesc::Sets and reads the I2C SCL line. |
| Bit Mask | [[PortMask::%0001 0000 0011 1011 ??]] |
| Readable | Readable::Yes |
| Writable | Writable::Yes |
| Subsystem | Subsystem::I2C |
When write, it sets the SCL line, D0 --> SCL When read, it reads the SCL line, SCL --> D0
Note that I2C uses open collector outputs, the idle, released state is '1'. So if you want to read the line, you have to set it to '1' first.