Difference between revisions of "Keyboard"
From SpecNext official Wiki
(info about multi-row reading possible) |
m |
||
| Line 1: | Line 1: | ||
{{Port | {{Port | ||
|Number=$**FE | |Number=$**FE | ||
| + | |NumberDec=254 | ||
| + | |PortMask=%xxxx xxxx ---- ---0 where only one bit in x is 0 | ||
|ShortDesc=Series of specific ports that read keyboard key presses. | |ShortDesc=Series of specific ports that read keyboard key presses. | ||
|Readable=Yes | |Readable=Yes | ||
|Writable=No | |Writable=No | ||
|Subsystem=Input | |Subsystem=Input | ||
| − | |||
}} | }} | ||
Reads keys on the keyboard depending on the upper byte of the port number. The five keys are represented by bits 0-4 of the read byte, listed below with bit 4 first down to bit 0. A zero means that the key is pressed. | Reads keys on the keyboard depending on the upper byte of the port number. The five keys are represented by bits 0-4 of the read byte, listed below with bit 4 first down to bit 0. A zero means that the key is pressed. | ||
Revision as of 13:44, 3 May 2020
| Number | $**FE |
|---|---|
| Decimal | 254 |
| Short desc. | Series of specific ports that read keyboard key presses. |
| Bit Mask | %xxxx xxxx ---- ---0 where only one bit in x is 0 |
| Readable | Yes |
| Writable | No |
| Subsystem | Input |
Reads keys on the keyboard depending on the upper byte of the port number. The five keys are represented by bits 0-4 of the read byte, listed below with bit 4 first down to bit 0. A zero means that the key is pressed.
The top eight bits of the port address are active low signals that select one or more key rows for reading.
| Port upper byte | Keys affected (row of keys) |
|---|---|
| $7F (bit 7) | B, N, M, Symbol Shift, Space |
| $BF (bit 6) | H, J, K, L, Enter |
| $DF (bit 5) | Y, U, I, O P |
| $EF (bit 4) | 6, 7, 8, 9, 0 |
| $F7 (bit 3) | 5, 4, 3, 2, 1 |
| $FB (bit 2) | T, R, E, W, Q |
| $FD (bit 1) | G, F, D, S, A |
| $FE (bit 0) | V, C, X, Z, Caps Shift |
