Difference between revisions of "ULA Control Register"
From SpecNext official Wiki
(Core 2.00.26 changes) |
(core 3.1.4 changes/refresh) |
||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 3: | Line 3: | ||
|Readable=Yes | |Readable=Yes | ||
|Writable=Yes | |Writable=Yes | ||
| − | |ShortDesc= | + | |ShortDesc=Disable ULA, controls ULA mixing/blending, enable ULA+ |
}} | }} | ||
{| class="wikitable" | {| class="wikitable" | ||
! Bit !! Function | ! Bit !! Function | ||
|- | |- | ||
| − | | 7 || 1 to disable ULA output | + | | 7 || 1 to disable ULA output (soft reset = 0) |
|- | |- | ||
| − | | 6 || 0 to select the ULA colour for blending in SLU modes 6 & 7 | + | | 6-5 || since core3.1.1: Blending in SLU modes 6 & 7 (soft reset = 0) |
| − | 1 to select the ULA/tilemap mix for blending in SLU modes 6 & 7 | + | = 00 for ULA as blend colour |
| + | = 10 for ULA/tilemap as blend colour | ||
| + | = 11 for tilemap as blend colour | ||
| + | = 01 for no blending | ||
| + | <del>bit 6: 0 to select the ULA colour for blending in SLU modes 6 & 7 (soft reset = 0) | ||
| + | 1 to select the ULA/tilemap mix for blending in SLU modes 6 & 7</del> | ||
|- | |- | ||
| − | | | + | | 4 || since core3.1.4: Cancel entries in 8x5 matrix for extended keys |
| + | |- | ||
| + | | 3 || ULA+ enable (soft reset = 0) | ||
| + | |- | ||
| + | | 2 || may change (ULA half pixel scroll) (soft reset = 0) | ||
| + | |- | ||
| + | | 1 || Reserved, must be 0 | ||
|- | |- | ||
| 0 || 1 to enable stencil mode when both the ULA and tilemap are enabled | | 0 || 1 to enable stencil mode when both the ULA and tilemap are enabled | ||
| Line 19: | Line 30: | ||
|} | |} | ||
| − | Bit 0 can be set to choose stencil mode for the combined output of the ULA and | + | Bit 0 can be set to choose stencil mode for the combined output of the ULA and [[Tilemap]]. |
| − | |||
| − | |||
| − | + | Bits 6-5 determine what colour is used in SLU modes 6 & 7 where the ULA is combined with Layer 2 to generate highlighting effects ({{NextRegNo|$15}}). | |
Latest revision as of 00:08, 16 April 2020
| Number | $68 |
|---|---|
| Readable | Yes |
| Writable | Yes |
| Short Description | Disable ULA, controls ULA mixing/blending, enable ULA+ |
| Bit | Function |
|---|---|
| 7 | 1 to disable ULA output (soft reset = 0) |
| 6-5 | since core3.1.1: Blending in SLU modes 6 & 7 (soft reset = 0)
= 00 for ULA as blend colour = 10 for ULA/tilemap as blend colour = 11 for tilemap as blend colour = 01 for no blending
|
| 4 | since core3.1.4: Cancel entries in 8x5 matrix for extended keys |
| 3 | ULA+ enable (soft reset = 0) |
| 2 | may change (ULA half pixel scroll) (soft reset = 0) |
| 1 | Reserved, must be 0 |
| 0 | 1 to enable stencil mode when both the ULA and tilemap are enabled
(if either are transparent the result is transparent otherwise the result is a logical AND of both colours) |
Bit 0 can be set to choose stencil mode for the combined output of the ULA and Tilemap.
Bits 6-5 determine what colour is used in SLU modes 6 & 7 where the ULA is combined with Layer 2 to generate highlighting effects (Sprite and Layers System Register ($15)).