Difference between revisions of "ULA Control Port"
From SpecNext official Wiki
(adding info) |
|||
| Line 4: | Line 4: | ||
|Readable=No | |Readable=No | ||
|Writable=Yes | |Writable=Yes | ||
| − | |||
}} | }} | ||
When written to, adjusts the border color and audio devices as follows: | When written to, adjusts the border color and audio devices as follows: | ||
| Line 13: | Line 12: | ||
| 0-2 || Border color | | 0-2 || Border color | ||
|- | |- | ||
| − | | 3 || | + | | 3 || MIC output (saving via audio jack) |
|- | |- | ||
| − | | 4 || | + | | 4 || EAR output (connected to internal speaker) |
|- | |- | ||
| 5-7 || Unused | | 5-7 || Unused | ||
|} | |} | ||
| − | Reading the port with certain particular high bytes will read the keyboard - see {{PortNo|$**FE}}. Bit 6 of the ULA byte is always the EAR input. | + | --------- |
| + | |||
| + | Reading the port with certain particular high bytes will read the keyboard - see {{PortNo|$**FE}}. Bit 6 of the ULA byte is always the EAR input (signal from tape audio jack - also input from [https://wiki.specnext.dev/Pi:index Pi] digital audio is now mixed in, since 3.0 cores). | ||
Revision as of 08:37, 31 December 2019
| Number | $xxFE |
|---|---|
| Decimal | |
| Short desc. | Controls border color and base Spectrum audio settings. |
| Bit Mask | |
| Readable | No |
| Writable | Yes |
| Subsystem |
When written to, adjusts the border color and audio devices as follows:
| Bit | Function |
|---|---|
| 0-2 | Border color |
| 3 | MIC output (saving via audio jack) |
| 4 | EAR output (connected to internal speaker) |
| 5-7 | Unused |
Reading the port with certain particular high bytes will read the keyboard - see Keyboard ($**FE / 254). Bit 6 of the ULA byte is always the EAR input (signal from tape audio jack - also input from Pi digital audio is now mixed in, since 3.0 cores).